01-13-2009 04:48 AM - edited 03-15-2019 03:28 PM
I have a UC520 and it runs SIP to the ISP. Outgoing calls works fine but not incoming. The configuration is posted in a .txt file. Anyone that has any suggestions to what it could be?
Solved! Go to Solution.
01-13-2009 05:16 AM
Means mismatched codec, see the ITSP doesn't use G.711 that is cisco default. Just put "codec G.711" under the incoming voip DP.
Hope this helps, please rate post if it does!
01-13-2009 04:50 AM
Take "debug ccsip message" with "term mon", this will tell you the error. In most cases, mismatching numbers or codec.
Hope this helps, please rate post if it does!
01-13-2009 05:02 AM
01-13-2009 05:16 AM
Means mismatched codec, see the ITSP doesn't use G.711 that is cisco default. Just put "codec G.711" under the incoming voip DP.
Hope this helps, please rate post if it does!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide