Need ppp dailup to 2600 with NM-8AM

Unanswered Question
Jan 13th, 2009
User Badges:

Router is 2600 with 12.3 IOS


I can't get my PPP sessions that are dialing in to use the defined radius server. Sessions connect, but don't authenticate. All this will be used for is emergency dialin.




What am I missing here?


doing a sho radius stats shows zero packets being exchanged between radius server and router.

thanks




----

aaa new-model

!

!

aaa group server radius radservers

server 192.168.99.49 auth-port 1645 acct-port 1646

!

aaa authentication login no_radius local enable

aaa authentication ppp default group radius group radservers

aaa authorization network default if-authenticated group radservers

aaa session-id common

ip subnet-zero

ip cef

!

!

ip domain name xxx.xxx.com

ip name-server 192.168.99.75

ip name-server 10.122.20.10

!

async-bootp dns-server 192.168.99.75 10.122.20.10

async-bootp nbns-server 192.168.99.49 10.192.20.10

!

!

!

!

interface Loopback0

ip address 192.168.98.1 255.255.255.0

!

interface Ethernet0/0

ip address 192.168.99.12 255.255.255.0

half-duplex

!

interface Group-Async1

ip unnumbered Loopback0

encapsulation ppp

no ip route-cache cef

no ip route-cache

ip tcp header-compression passive

dialer in-band

dialer idle-timeout 600

dialer-group 1

async mode interactive

peer default ip address pool pool0

ppp authentication pap

!

ip local pool pool0 192.168.98.2 192.168.98.100

no ip http server

ip classless

ip route 0.0.0.0 0.0.0.0 192.168.99.1

!

!

ip radius source-interface Ethernet0/0

logging trap debugging

logging 192.168.99.15

access-list 66 deny any

access-list 101 deny udp any any eq netbios-ns

access-list 101 deny udp any any eq netbios-dgm

access-list 101 permit ip any any

dialer-list 1 protocol ip list 101

snmp-server enable traps tty

radius-server timeout 1

radius-server key changeme

!

line con 0

logging synchronous

line 33 40

modem Dialin

modem autoconfigure discovery

transport input all

autoselect during-login

autoselect ppp

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
dmooreami Tue, 01/13/2009 - 14:24
User Badges:

updated config


fyi, if I have Winxp do a "pop-up" window after modem connects, I don't get ppp characters, but am prompted for username..


This makes no sense since I am forcing the connection to PPP in the Async group.



------------------

aaa new-model

!

!

aaa group server radius radservers

server 192.168.99.49 auth-port 1645 acct-port 1646

!

aaa authentication login no_radius enable

aaa authentication ppp dialins group radius group radservers

aaa authorization network default if-authenticated group radservers

aaa session-id common

ip subnet-zero

ip cef

!

!

ip domain name bigdomain.com

ip name-server 192.168.99.75

ip name-server 10.122.20.10

!

async-bootp dns-server 192.168.99.75 10.122.20.10

async-bootp nbns-server 192.168.99.49 10.192.20.10

!

!

!

!

interface Loopback0

ip address 192.168.98.1 255.255.255.0

!

interface Ethernet0/0

ip address 192.168.99.12 255.255.255.0

half-duplex

!

interface Group-Async1

ip unnumbered Loopback0

encapsulation ppp

no ip route-cache cef

no ip route-cache

ip tcp header-compression passive

dialer in-band

dialer idle-timeout 600

dialer-group 1

async mode dedicated

peer default ip address pool pool0

ppp authentication pap chap ms-chap ms-chap-v2 callin dialins

!

ip local pool pool0 192.168.98.2 192.168.98.100

no ip http server

ip classless

ip route 0.0.0.0 0.0.0.0 192.168.99.1

!

!

ip radius source-interface Ethernet0/0

logging trap debugging

logging 192.168.99.15

access-list 66 deny any

access-list 101 deny udp any any eq netbios-ns

access-list 101 deny udp any any eq netbios-dgm

access-list 101 permit ip any any

dialer-list 1 protocol ip list 101

snmp-server enable traps tty

radius-server timeout 30

radius-server key cisco

!

line con 0

logging synchronous

line 33 40

modem Dialin

modem autoconfigure discovery

transport input all

autoselect during-login

autoselect ppp

line aux 0

line vty 0 4

exec-timeout 0 0

password cisco

login authentication no_radius

Actions

This Discussion