01-13-2009 11:37 PM
Hi,
In case of site to site VPN between static IP (ASA) and dynamic IP (Linksys AG241), would it be possible to initiate VPN tunnel from the static side? How can I configure it? Could you please advice?
Thank you very much,
Nitass
Solved! Go to Solution.
01-14-2009 03:54 AM
Nitass, I am quite sure that you cannot initiate a session with from ASA, that is from VPN server side.
01-14-2009 01:23 AM
Nitass,
ASA would not support dynamic VPN like DMVPN. If your Linksys device supports, you can configure EZVPN between ASA and the Linksys device. This way you can have a static IP address on the ASA and a dynamic ip addr on Linksys device.
01-14-2009 01:30 AM
Hi Sachin,
Thanks for reply. Anyway, can I initiate the VPN tunnel from the Linksys (dynamic IP) side rather than the ASA (static IP) side?
Thanks,
Nitass
01-14-2009 02:07 AM
Hi Nitass,
Yes the tunnel will always be initiated from the client (Linksys) side.
01-14-2009 02:18 AM
Hi Sachin,
Sorry I mistyped. Actually, I would like to ask if I can initiate the VPN tunnel from the ASA (static) side or not.
Thanks,
Nitass
01-14-2009 03:54 AM
Nitass, I am quite sure that you cannot initiate a session with from ASA, that is from VPN server side.
01-14-2009 05:20 AM
Hi Sachin,
I see. :(
Thanks,
Nitass
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide