CME, Displaying CallerID and Station-ID

Unanswered Question
Jan 14th, 2009

CallerID is displayed,

But Station ID is not, why?

Here is the config

voice-port 0/1/0

connection plar opx 0

description desc-1

station-id name st-1

station-id number 555

caller-id enable

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Nicholas Matthews Wed, 01/14/2009 - 05:22

IOS will try to get caller-id first, and then station id if caller-id fails.

This means you have a calller-id error.

Try using the correct cptone for your country?

-nick

recep.sefer Wed, 01/14/2009 - 10:31

I get Caller-ID

But at the same time, I want to see Station-ID

Thanks

Nicholas Matthews Wed, 01/14/2009 - 10:47

We will only show one or the other.

This is the order the CME will choose Caller ID:

1) Caller ID (if it exists)

2) Station ID (if it exists)

3) Destination pattern on incoming pots dial peer

It's not possible to display both the caller id and station id. The station ID replaces the caller id if it does not exist.

hth,

nick

Actions

This Discussion