Solved: LMS RME inventory report for SN

steffen.plorin · ‎01-14-2009

He Guys,

I build the report and be confused.As Example a access point provide two numbers as follow:

cisco AIR-AP1242AG-E-K9

Processor board ID FOC09441YVH

PCB Serial Number : FOC09441YVH

Top Assembly Serial Number : FCZ0952803R

The top assembly SN is written outside of the chassi the PCB SN is internal on the board. The inventory show me as chassi SN the PCB number cisco view always the top assembly number.

To add around 400 devices correctly under cisco maintenance I guess I need a report for the top assembly SN, but the inventory do not provide it.

How can I build it or does some one know if cisco maintenance both numbers in the database ?

Danke Gruss Steffen

Joe Clarke · ‎01-14-2009

If the device is not providing this automatically, you can configure a user-defined serial number for the device under RME > Devices > Device Management > RME Devices > Edit Device Attributes.

View solution in original post

Joe Clarke · ‎01-14-2009

If the device is not providing this automatically, you can configure a user-defined serial number for the device under RME > Devices > Device Management > RME Devices > Edit Device Attributes.

steffen.plorin · ‎01-15-2009

He JClarke,

yes I know how todo, but it will be manually with mistakes sometimes.

Danke Gruss Steffen