I have a PIX 515 6.3 and I want to have the LAN behind a DMZ to access the servers on the inside LAN and also the remote hosts which are routed on a L3 switch.
This is what I did :
nat (DMZ) 4 192.168.4.0 255.255.255.0 outside 0 0
global (inside) 4 172.16.10.10
access-list DMZ-TEST permit ip 192.168.4.0 255.255.255.0 any
And it does not work.
I get back " No transaltion group found".
This is the PIX:
Cisco PIX Firewall Version 6.3(4)
nameif ethernet1 inside security100
nameif ethernet2 DMZ security20
Thanks for the help!