Hello. I am having trouble performing a simple autonomous to lwapp conversion on a 1252 .11n AP. It is the LWAPP model number, but of course it shipped with Autonomous code on it. So I have to convert.
I have version 3.4 of upgrade tool. I create the flat file with the one AP in it and enter all the necessary information. I use the upgrade tool TFTP server and navigate/select the image file: exact file is -> "c1250-rcvk9w8-tar.124-10b.JA3.tar". When I select upgrade I get an error indicating the recovery image is not a valid one.
Does anyone know what I am missing here? Can someone outline the steps? This is my first conversion attempt as I have been running 1000 Series APs for the past 3 years.
If you need to convert from LWAPP to Autonomous, try this ...
â¢ Image file (such as c1200-k9w7-tar.122-15.JA.tar);
â¢ AP is connected to the Wireless LAN Controller; and
â¢ AP can ping the TFTP server where the image is located.
1. Find out what AP needs to be converted from LWAPP to Autonomous mode by entering the following command:
sh ap summary
2. Enter the following CLI command on the Wireless LAN Controller:
config ap tftp-downgrade
3. The AP will download the software and after a reboot, the AP will be on Autonomous mode.
NOTE: Can you please put a "tick" that your issue has been resolved?