01-15-2009 09:07 AM - edited 03-15-2019 03:32 PM
I have a phone, that when the hand set is picked up, I want to automatically dial an extension. This phone will only be used to dial this extension when the hand set is picked up. We are running Call Manager 6.1. Is this possible, and if so, how does one set this up?
Solved! Go to Solution.
01-15-2009 10:07 AM
Hi Adam,
Just to add a note to the great tips from Nick (+5 points Nick :)
There is a great step by step here;
Hotdial on IP Phones with CallManager Configuration Example
Hope this helps!
Rob
01-15-2009 10:00 AM
What you do is create a CSS that contains a single translation pattern that translates 0 digits into the number you want to dial.
Here are the specific steps:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_3/cucm-rel_note-613.html#wp472214
hth,
nick
01-15-2009 10:07 AM
Hi Adam,
Just to add a note to the great tips from Nick (+5 points Nick :)
There is a great step by step here;
Hotdial on IP Phones with CallManager Configuration Example
Hope this helps!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: