01-15-2009 11:25 AM - edited 07-03-2021 05:00 PM
we are currently using WCS version 5.0.56.2.
I have about 80 AP's that we added when we converted from Autonomous to LWAPP.
Today, i see a new AP in the list that I didnt add - it stands out because the name is so different from our naming standard, and its not "associated" with the controller.
My question is this - why would WCS see that as a "valid" AP instead of a rouge? Is it common for WCS to add an AP automatically if it is "LWAPP" enabled? I thought we had to actually import the device?
The AP appears to be a Cisco AP (by the mac address database search) AND shows to be using LWAPP. It currently seems to be shutdown/offline, so im having a hard time actually finding the thing. Also, I do not see this ap listed on any of my controllers (which i am not really suprised by - since its not "associated".)
Any advice welcome.
01-15-2009 11:53 AM
What is the name that you see on WCS? Something similar to APxxxxxx?
01-15-2009 11:56 AM
No - its showing up as "Sparks-1". Our naming standard is to use the Building abbreviation-floor-AP-# so, JAC-6-AP-1 would be the 1st ap on the 6th floor of building JAC.
01-15-2009 02:18 PM
Why would WCS see that as a "valid" AP instead of a rouge?
Because the AP is PLUGGED into your wired network.
01-15-2009 02:24 PM
Interesting. I guess im confused on how the AP could be in WCS, but not on any of the controllers.
I have since deleted the device from WCS, so if it shows up again, i might have a better chance of finding.
Is there way to have WCS email me when a new AP is added?
01-15-2009 03:08 PM
Try to "track" the Rogue AP down to the switch port and disable it.
If anyone screams, then you'll know what it's all about.
01-18-2009 12:59 AM
Hi,
First of all you can search in the WCS which AP's sees this "valid" AP.
Is it possiable that while converting from autonomous to LWAPP something got wrong and this AP didn't get the x509 certificate as needed and due to that he fails to register correctly to the WLC?
Cheers,
01-18-2009 05:29 AM
We determined whos AP it was. While it is a friendly, it was installed wrong. My main concern is how WCS and AP were able to find each other and get added.
01-18-2009 05:27 PM
WCS shows any AP that associated with a controller. Not just the APs that are currently associated.
So the simplest explanation is that the AP in question temporarily registered with one of your controllers, and therefor WCS added it to the database.
With that said, APs automatically register with controllers. So anyone could bring in an AP, plug it in, auto register (assuming DHCP/DNS/ or any other method of controller discovery) and then even if they remove the AP forever more, the AP will still be listed in WCS.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide