LAP521 can't connect to WLC526?

Unanswered Question
Jan 15th, 2009
User Badges:

I'm relatively new to the Cisco scene and are now trying to set up the UC520, WLC526 and two LAP521. I got the UC and WLC to play nicely but the AP's doesn't recieve config from the wlc. They show up in CCA as connected to the UC but doesn't recieve an IP. Also they won't show up in "wireless radios"in the CCA.

I've created a community with the uc and wlc with a 7941 and the AP's listed as neighbours.

Anyone have any ideas?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Leo Laohoo Mon, 01/19/2009 - 21:14
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Can the LAP521 ping the WLC526?

m.junghage Thu, 01/29/2009 - 01:53
User Badges:

No, I can't ping from the LAP521. It's reloading after boot with the message that it can't connect to the wlc526. That goes for the both of them, so it shouldn't be a faulty unit.

m.junghage Tue, 03/24/2009 - 03:41
User Badges:

I've solved it, didn't realise that it needed to be connected to a dhcp right after the initial config. My bad.


This Discussion