01-15-2009 12:54 PM - edited 07-03-2021 05:00 PM
I'm relatively new to the Cisco scene and are now trying to set up the UC520, WLC526 and two LAP521. I got the UC and WLC to play nicely but the AP's doesn't recieve config from the wlc. They show up in CCA as connected to the UC but doesn't recieve an IP. Also they won't show up in "wireless radios"in the CCA.
I've created a community with the uc and wlc with a 7941 and the AP's listed as neighbours.
Anyone have any ideas?
Thanks!
01-19-2009 09:14 PM
Can the LAP521 ping the WLC526?
01-29-2009 01:53 AM
No, I can't ping from the LAP521. It's reloading after boot with the message that it can't connect to the wlc526. That goes for the both of them, so it shouldn't be a faulty unit.
03-24-2009 03:41 AM
I've solved it, didn't realise that it needed to be connected to a dhcp right after the initial config. My bad.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide