If we want to use H.323 gateway what will be the difference.

Thanks a lot nick.

WAY different, they're as day and night

Cisco IOS H.323 Configuration Guide

http://www.cisco.com/en/US/partner/docs/ios/12_3/vvf_c/cisco_ios_h323_configuration_guide/old_archives_h323/323confg.html

Cisco IOS H.323 Gateway Configuration for Use with Cisco CallManager

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_tech_note09186a0080094636.shtml

Dial Peer Configuration on Voice Gateway Routers

http://www.cisco.com/en/US/partner/docs/ios/12_3/vvf_c/dial_peer/dpeer_c.html

HTH

java

if this helps, please rate

Sorry java,

i cant get access to this links

Hello Tito,

you may need to change

/US/partner/ in /US/customer/ in all the URLs

this depends on your CCO account

Hope to help

Giuseppe

Hi Tito,

With MGCP, you can use autoconfiguration and CUCM controls the dial plan. In a way, all of the voice stuff that happens goes way over the router's head, and it doesn't see much at all.

In H323, the router does everything. It controls all of the dial plans, IP addresses, translation, signaling options, blocking of calls, everything.

MGCP can be implemented on a gateway in 3-4 lines of configuration.

H323 will be around 30 for a simple setup, possibly hundreds for something more involved. Plus, it will be much more troubleshooting if you don't know what you're doing.

If you'd like more details, you can start clicking and looking at java's links.

hth,

nick