01-16-2009 01:05 AM - edited 03-06-2019 03:28 AM
I might need to format or delete file into the PC Cards in 6509 slot0, but I can't do it.
I changed the PC Cards with a New and I've the same thing.
Anything suggestion ?
Thanks
Solved! Go to Solution.
01-19-2009 01:32 PM
You may have a faulty card and may need to be replaced. Which supervisor and software version are you running? Also check this field notice and see if it applies to you.
http://www.cisco.com/en/US/ts/fn/620/fn62466.html
Mark
01-17-2009 12:48 PM
Which CF card are you using? Have you tried formatting in another slot or supervisor?
01-19-2009 06:12 AM
Yes, but I can't do It, because I obtain the same result.
I used a "MEM-C64K-ATA-1-64M" memory card.
Is it correct ?
01-19-2009 01:32 PM
You may have a faulty card and may need to be replaced. Which supervisor and software version are you running? Also check this field notice and see if it applies to you.
http://www.cisco.com/en/US/ts/fn/620/fn62466.html
Mark
01-27-2009 08:45 AM
Thanks,
I've a Sup1a and It doesn't support the ATA PC CARD.
Best reguard
01-18-2009 01:19 PM
I think it will only accept UP TO 2Gig Type III CF cards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide