01-16-2009 01:05 AM - edited 03-06-2019 03:28 AM
I might need to format or delete file into the PC Cards in 6509 slot0, but I can't do it.
I changed the PC Cards with a New and I've the same thing.
Anything suggestion ?
Thanks
Solved! Go to Solution.
01-19-2009 01:32 PM
You may have a faulty card and may need to be replaced. Which supervisor and software version are you running? Also check this field notice and see if it applies to you.
http://www.cisco.com/en/US/ts/fn/620/fn62466.html
Mark
01-17-2009 12:48 PM
Which CF card are you using? Have you tried formatting in another slot or supervisor?
01-19-2009 06:12 AM
Yes, but I can't do It, because I obtain the same result.
I used a "MEM-C64K-ATA-1-64M" memory card.
Is it correct ?
01-19-2009 01:32 PM
You may have a faulty card and may need to be replaced. Which supervisor and software version are you running? Also check this field notice and see if it applies to you.
http://www.cisco.com/en/US/ts/fn/620/fn62466.html
Mark
01-27-2009 08:45 AM
Thanks,
I've a Sup1a and It doesn't support the ATA PC CARD.
Best reguard
01-18-2009 01:19 PM
I think it will only accept UP TO 2Gig Type III CF cards.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: