Solved: 6509 PC Card format failed in slot0

michelerossi · ‎01-16-2009

I might need to format or delete file into the PC Cards in 6509 slot0, but I can't do it.

I changed the PC Cards with a New and I've the same thing.

Anything suggestion ?

Thanks

Mark Yeates · ‎01-19-2009

You may have a faulty card and may need to be replaced. Which supervisor and software version are you running? Also check this field notice and see if it applies to you.

http://www.cisco.com/en/US/ts/fn/620/fn62466.html

Mark

View solution in original post

Mark Yeates · ‎01-17-2009

Which CF card are you using? Have you tried formatting in another slot or supervisor?

michelerossi · ‎01-19-2009

Yes, but I can't do It, because I obtain the same result.

I used a "MEM-C64K-ATA-1-64M" memory card.

Is it correct ?

Mark Yeates · ‎01-19-2009

You may have a faulty card and may need to be replaced. Which supervisor and software version are you running? Also check this field notice and see if it applies to you.

http://www.cisco.com/en/US/ts/fn/620/fn62466.html

Mark

michelerossi · ‎01-27-2009

Thanks,

I've a Sup1a and It doesn't support the ATA PC CARD.

Best reguard

Leo Laohoo · ‎01-18-2009

I think it will only accept UP TO 2Gig Type III CF cards.