01-16-2009 07:27 AM - edited 03-15-2019 03:34 PM
I am trying to test a SRST fail over scenario with a few phones(7941,7961 and 7912) When I force a fail over to SRST the phones all register with the Voice Gateway but only the 7912 has its line intact. The 7941s and 7961s are registerd with no line on the phone. Any Ideas? This is CCM 4.2 and Version 12.4(4)XC7 IOS
01-16-2009 08:21 AM
What version of SRST are you running?
show call-manager-fallback
01-16-2009 08:27 AM
I am running the following:
#sh call-manager-fallback all
CONFIG (Version=4.0(3))
=====================
Version 4.0(3)
According to this document the 7941/7961s are supported.
ephone-1 Mac:0017.59D3.CEEE TCP socket:[1] activeLine:0 REGISTERED in SCCP ver 9 and Server in ver 5
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:1 caps:9
IP:172.20.1.23 52004 7941 keepalive 3 max_line 2
01-16-2009 09:11 PM
The 7912 has different
way the phone's user interface is
handled compared to the 7960
Fist, Try upgrading the load on 7912
Also, can I see the config for SRST router
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide