Redundant WAAS Configuration

Unanswered Question

I currently have a production WAAS environment leveraging WCCPv2 for redirection with a single WAAS at each of my 3 data centers. I want to add a second WAAS into the WCCP for each location. Can somebody please provide a link for configuring this? I have seen you can do multi-cast or unicast wccp groups. Is that correct? Is there a benefit to one over the other. Thanks for your help.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
sameer.shah Sat, 01/17/2009 - 10:56
User Badges:

Hi

Please go thro' below link explains you about load balancing with WCCP and multiple WAE


http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v4019/configuration/guide/traffic.html#wp1041807


Also, about unicast and multicat deployment the only difference is that On each WAE you need to configure multiple unicast router addresses in the WCCP router list, one for each router in the service group for unicast whereas for multicast, you just need to specify multicast group-address.


I hope this anwers your query


Actions

This Discussion