TestProtocolMatchChannel --------> F

Unanswered Question
Jan 18th, 2009

Router>sh diagn mod 5

Current bootup diagnostic level: minimal

Module 5: Supervisor Engine 32 10GE (Active) SerialNo : SAL1010F4HS

Overall Diagnostic Result for Module 5 : MINOR ERROR

Diagnostic level at card bootup: minimal

Test results: (. = Pass, F = Fail, U = Untested)

1) TestSPRPInbandPing --------------> U

2) TestTransceiverIntegrity:

Port 1 2

----------

U U

3) TestActiveToStandbyLoopback:

Port 1 2 3

-------------

U U U

4) TestLoopback:

Port 1 2 3

-------------

. . .

5) TestTxPathMonitoring ------------> .

6) TestNewIndexLearn ---------------> .

7) TestDontConditionalLearn --------> .

8) TestBadBpduTrap -----------------> .

9) TestMatchCapture ----------------> .

10) TestProtocolMatchChannel --------> F

11) TestFibDevices ------------------> .

12) TestIPv4FibShortcut -------------> .

13) TestL3Capture2 ------------------> .

14) TestIPv6FibShortcut -------------> .

15) TestMPLSFibShortcut -------------> .

16) TestNATFibShortcut --------------> .

17) TestAclPermit -------------------> .

18) TestAclDeny ---------------------> .

19) TestQoSTcam ---------------------> .

20) TestL3VlanMet -------------------> .

21) TestIngressSpan -----------------> .

22) TestEgressSpan ------------------> .

23) TestNetflowInlineRewrite:

Port 1 2 3

-------------

U U U

24) TestTrafficStress ---------------> U

25) TestFibTcamSSRAM ----------------> U

26) TestAsicMemory ------------------> U

27) TestAclQosTcam ------------------> U

28) TestNetflowTcam -----------------> U

29) ScheduleSwitchover --------------> U

30) TestFirmwareDiagStatus ----------> .

These are the test results of sup32-10GE(base),I Wonder if there are something wrong in software or hardware.How can i do for these .THANKS A LOT!by the way ,it is good for CATOS. <ios:s3223-ipbasek9-mz.122-18.SXF14.bin catos:cat6000-sup32pfc3cvk8.8-7-1.bin >

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
glen.grant Mon, 01/19/2009 - 05:17

Set the diagnostic level as complete and reload again and look at the post tests , if you are still seeing the error and or other errors open a tac case.

Actions

This Discussion