01-19-2009 03:26 AM - edited 03-11-2019 07:38 AM
Hi folks,
I'm planning a pair of 5520's in active/standby mode and am wondering if I can use the inside interfaces connected to different stack members? Methinks this would afford me additional redundancy - but can it work? Btw the f/over link will be through a dedicated switch not part of the stack.
Regards,
Andy.
Solved! Go to Solution.
01-19-2009 06:16 AM
Andy,
Yes it will work - even though they are physically 2 seperate switches, in a stack they are 1 logical switch.
HTH>
01-19-2009 06:16 AM
Andy,
Yes it will work - even though they are physically 2 seperate switches, in a stack they are 1 logical switch.
HTH>
01-19-2009 07:25 AM
Andrew,
Many thanks - I was hoping so.
Best regards,
Andy.
01-19-2009 07:30 AM
np - glad to help - thanks for the rating.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide