Translation pattern in CUCM doesn't work as I want??

Unanswered Question
Jan 19th, 2009

Earlier I could call from translation pattern with mask in configured Translation Pattern. Now I cann't . Is it some bug??

CSS, Partitions and Translation pattern configured right

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
webstd.design Mon, 01/19/2009 - 04:40

When I call #933555555 I want to go out to PSTN with number 782090

but I go out with line external mask number

webstd.design Mon, 01/19/2009 - 05:28

Results Summary

Calling Party Information

Calling Party = 782099 <--RIGHT NUMBER

Partition =

Device CSS =

Line CSS = Kiev_Employers_CSS

AAR Group Name =

AAR CSS =

Dialed Digits = #933782200

Match Result = RouteThisPattern

Matched Pattern Information

Pattern = [27]XXXXX

Partition = Lt_City_PT

Time Schedule =

Called Party Number = 782200

Time Zone = Greenwich Standard Time

End Device = Lt_RL

Call Classification = OnNet

InterDigit Timeout = NO

Device Override = Disabled

Outside Dial Tone = NO

Call Flow

TranslationPattern :Pattern= #933.!

Positional Match List = 782200

Calling Party Number = 782099

PreTransform Calling Party Number = 1129

PreTransform Called Party Number = #933782200

Calling Party Transformations

External Phone Number Mask = NO

Calling Party Mask = 78209X

Prefix =

CallingLineId Presentation = Default

CallingName Presentation = Default

Calling Party Number = 782099

ConnectedParty Transformations

ConnectedLineId Presentation = Default

ConnectedName Presentation = Default

Called Party Transformations

Called Party Mask =

Discard Digits Instruction = PreDot

Prefix =

Called Number = 782200

Route Pattern :Pattern= [27]XXXXX

Positional Match List = 782200

DialPlan =

Route Filter

Filter Name =

Filter Clause =

Require Forced Authorization Code = No

Authorization Level = 0

Require Client Matter Code = No

Call Classification =

PreTransform Calling Party Number = 782099

PreTransform Called Party Number = 782200

Calling Party Transformations

External Phone Number Mask = YES

Calling Party Mask =

Prefix =

CallingLineId Presentation = Default

CallingName Presentation = Default

Calling Party Number = 782099

ConnectedParty Transformations

ConnectedLineId Presentation = Default

ConnectedName Presentation = Default

Called Party Transformations

Called Party Mask =

Discard Digits Instruction = None

Prefix =

Called Number = 782200

Route List :Route List Name= Lt_RL

RouteGroup :RouteGroup Name= Lt_RG

PreTransform Calling Party Number = 782099

PreTransform Called Party Number = 782200

Calling Party Transformations

External Phone Number Mask = Default

Calling Party Mask =

Prefix =

Calling Party Number = 782099

Called Party Transformations

Called Party Mask =

Discard Digits Instructions =

Prefix =

Called Number = 782200

Device :Type= MGCPE1PRIPort

End Device Name = S0/SU0/[email protected]

PortNumber = 0

Device Status = Registered

AAR Group Name =

AAR Calling Search Space =

AAR Prefix Digits =

Call Classification =

Calling Party Selection =

CallingLinePresentation =

ConnectedLinePresentation =

Number Of Strip Digits =

CallerID DN =

Alternate Matches

Note: Information Not Available

webstd.design Mon, 01/19/2009 - 05:29

debug isdn q931

Jan 19 13:28:29.136: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8 callref = 0x00A0

Sending Complete

Bearer Capability i = 0x8090A3

Standard = CCITT

Transfer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA9839E

Exclusive, Channel 30

Calling Party Number i = 0x0081, '5930029' <-- NO NEEDED NUMBER

Plan:Unknown, Type:Unknown

Called Party Number i = 0x80, '780002'

Plan:Unknown, Type:Unknown

Jan 19 13:28:29.152: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x80A0

Channel ID i = 0xA9839E

Exclusive, Channel 30

Jan 19 13:28:29.300: ISDN Se0/0/0:15 Q931: RX <- ALERTING pd = 8 callref = 0x80A0

Jan 19 13:28:30.044: ISDN Se0/0/0:15 Q931: RX <- CONNECT pd = 8 callref = 0x809F

Channel ID i = 0xA9839F

Exclusive, Channel 31

Date/Time i = 0x0901130F1C00

Jaime Valencia Mon, 01/19/2009 - 08:54

in the past when i've seen this the issue wasn't even CCM, it was the GW.

the only way to confirm this is getting a CUCM detailed trace, looking at the call info line for the call and reviewing the setup message sent by CUCM, if all the info matches but still the GW sends something else the options are try a no mgcp/mgcp and/or reload the GW

HTH

java

if this helps, please rate

webstd.design Mon, 01/19/2009 - 09:33

I was very confused when saw that this solution doesn't work.

It worked with CCM 4.3 - but after upgrade I only now checked that I have some problems.

I have done no mgcp / mgcp ofcourse, but it was helped.

Let's try to to upgrade CUCM..

Actions

This Discussion