B-ACD welcome script start delay

Unanswered Question
Jan 19th, 2009

I have configured CME 4.1 on 2811 router with IOS IPVoice 12.4(15)T. The b-acd is configured successfully but when i dial the aa-pilot extension the welcome audio starts exactly after 20secs. The debug command shows the following results.

VOICE-RTR#

Jan 19 14:26:59.393: //2088//TCL :/tcl_PutsObjCmd:

proc init_perCallvars

Jan 19 14:26:59.393:

Jan 19 14:26:59.393: //2088//TCL :/tcl_PutsObjCmd: TCL AA: ++ Playing Welcome Prompt and options menu ++

Jan 19 14:27:13.461: //649//TCL :/tcl_PutsObjCmd: TCL B-ACD: >>> B-ACD Service Running <<<

Jan 19 14:27:19.449: //2088//TCL :/tcl_PutsObjCmd: TCL AA: +++ No option selected +++

Jan 19 14:27:27.657: tdiff:439174080 tx2:409 rx2:410 pps2:50 ve:0 exp_p2:22346 pmc:1

Jan 19 14:27:27.657: Potential Mute Call:

Jan 19 14:27:27.657: CallID1=2086; CallID2=2087; ConfID=682

Jan 19 14:27:27.657: Leg 1: CallID=2086; TX packets: 409; RX packets: 1405

Jan 19 14:27:27.657: Leg 2: CallID=2087; TX packets: 409; RX packets: 410

Below is my configuration for b-acd.

application

service queue flash:app-b-acd-2.1.2.2.tcl

param queue-len 10

param aa-hunt4 3333

param aa-hunt1 1111

param queue-manager-debugs 1

param aa-hunt2 2222

param number-of-hunt-grps 3

!

service aa flash:app-b-acd-aa-2.1.2.2.tcl

paramspace english index 1

param number-of-hunt-grps 3

param menu-timeout 6

param dial-by-extension-option 3

param handoff-string aa

paramspace english language en

param max-time-vm-retry 2

param max-extension-length 4

param aa-pilot 8888

paramspace english location flash:

param second-greeting-time 10

param welcome-prompt en_bacd_welcome.au

param call-retry-timer 10

paramspace english prefix en

param voice-mail 5003

param max-time-call-retry 600

param service-name queue

Can anyone tells whats the problem here.

thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
sfurqanli Mon, 01/19/2009 - 21:23

I have both E1 and FXO installed on the router but at this time i am testing it with IP Phone where as the result is same for IP Phone and Analog phone, please elaborate if you are asking something different. Below is the Dial-Peer for AA service.

dial-peer voice 100 voip

service aa

destination-pattern 8888

session target ipv4:192.168.1.20

incoming called-number 8888

dtmf-relay h245-alphanumeric

codec g711ulaw

no vad

thanks

pemelend Mon, 01/19/2009 - 23:12

Hi

That behavior normally happens when the sript can't find the welcome greeting.

It fails because you configured"

"param welcome-prompt en_bacd_welcome.au"

and it should have been without the "en"

only

"welcome-prompt _bacd_welcome.au"

Make sure the file is saved in flash.

Thanks

Pedro

sfurqanli Mon, 01/19/2009 - 23:20

Thanks for the reply.

The file is already in the flash. Below are files in the router's flash:

VOICE-RTR#show flash

-#- --length-- -----date/time------ path

1 93095 Jan 24 2008 07:44:20 +05:00 attack-drop.sdf

2 331483 Jan 1 2009 15:39:44 +05:00 CP7902080001SCCP051117A.sbin

3 818176 Jan 24 2008 07:45:22 +05:00 common.tar

4 741376 Jan 24 2008 07:45:28 +05:00 es.tar

5 1038 Jan 24 2008 07:45:34 +05:00 home.shtml

6 113152 Jan 24 2008 07:45:38 +05:00 home.tar

7 1198080 Jan 24 2008 07:45:48 +05:00 ips.tar

8 3029504 Jan 24 2008 07:46:04 +05:00 sdm.tar

9 1648 Jan 24 2008 07:46:10 +05:00 sdmconfig-2811.cfg

10 41141408 Jan 1 2009 15:17:16 +05:00 c2800nm-ipvoicek9-mz.124-15.T.bin

11 11650 Jan 1 2009 15:25:44 +05:00 app-cme-did-2.0.0.0.ReadMe

12 15020 Jan 1 2009 15:25:44 +05:00 app-cme-did-2.0.0.0.tcl

13 83291 Jan 1 2009 15:25:46 +05:00 en_disconnect.au

14 18836 Jan 1 2009 15:26:26 +05:00 app-b-acd-2.1.2.2-ReadMe.txt

15 24985 Jan 12 2009 15:42:50 +05:00 app-b-acd-2.1.2.2.tcl

16 35485 Jan 12 2009 15:43:14 +05:00 app-b-acd-aa-2.1.2.2.tcl

17 75650 Jan 1 2009 15:26:28 +05:00 en_bacd_allagentsbusy.au

18 83291 Jan 1 2009 15:26:28 +05:00 en_bacd_disconnect.au

19 63055 Jan 1 2009 15:26:28 +05:00 en_bacd_enter_dest.au

20 37952 Jan 1 2009 15:26:28 +05:00 en_bacd_invalidoption.au

21 496521 Jan 1 2009 15:26:30 +05:00 en_bacd_music_on_hold.au

22 123446 Jan 1 2009 15:26:30 +05:00 en_bacd_options_menu.au

23 42978 Jan 1 2009 15:26:32 +05:00 en_bacd_welcome.au

24 34794 Jan 1 2009 15:26:32 +05:00 en_bacd_xferto_operator.au

25 4627 Jan 1 2009 15:32:46 +05:00 admin_user.html

26 653758 Jan 1 2009 15:32:48 +05:00 admin_user.js

27 1029 Jan 1 2009 15:32:48 +05:00 CiscoLogo.gif

28 618 Jan 1 2009 15:32:48 +05:00 CME_GUI_README.TXT

29 953 Jan 1 2009 15:32:48 +05:00 Delete.gif

30 16344 Jan 1 2009 15:32:50 +05:00 dom.js

31 864 Jan 1 2009 15:32:50 +05:00 downarrow.gif

32 6146 Jan 1 2009 15:32:50 +05:00 ephone_admin.html

33 4658 Jan 1 2009 15:32:50 +05:00 logohome.gif

34 3724 Jan 1 2009 15:32:50 +05:00 normal_user.html

35 80033 Jan 1 2009 15:32:50 +05:00 normal_user.js

36 1347 Jan 1 2009 15:32:50 +05:00 Plus.gif

37 843 Jan 1 2009 15:32:52 +05:00 sxiconad.gif

38 174 Jan 1 2009 15:32:52 +05:00 Tab.gif

39 2410 Jan 1 2009 15:32:52 +05:00 telephony_service.html

40 870 Jan 1 2009 15:32:52 +05:00 uparrow.gif

41 9968 Jan 1 2009 15:32:52 +05:00 xml-test.html

42 3412 Jan 1 2009 15:32:52 +05:00 xml.template

43 338840 Jan 1 2009 15:40:02 +05:00 CP7905080001SCCP051117A.sbin

44 338424 Jan 1 2009 15:40:18 +05:00 CP7905080001SCCP051117A.zup

45 340631 Jan 1 2009 15:40:36 +05:00 CP7912080001SCCP051117A.sbin

46 349794 Jan 1 2009 15:41:08 +05:00 P00405000700.bin

47 350198 Jan 1 2009 15:41:24 +05:00 P00405000700.sbn

48 1908762 Jan 1 2009 15:41:42 +05:00 P00503010100.bin

49 49169 Jan 1 2009 15:41:50 +05:00 S00104000100.sbn

50 49599 Jan 1 2009 15:42:02 +05:00 S00105000200.sbn

51 129828 Jan 1 2009 15:42:32 +05:00 P00308000400.bin

52 461 Jan 1 2009 15:42:32 +05:00 P00308000400.loads

53 701768 Jan 1 2009 15:42:34 +05:00 P00308000400.sb2

54 130232 Jan 1 2009 15:42:36 +05:00 P00308000400.sbn

55 2759 Jan 1 2009 15:42:36 +05:00 Readme7960-40.txt

As i already said that welcome message starts but after exactly 20 seceonds.

Thanks

sfurqanli Tue, 01/20/2009 - 21:37

Can anyone suggest what debug command should i run to find out the issue to resolve it.

thanks

Paolo Bevilacqua Wed, 01/21/2009 - 09:52

Does the call come in via pots? So create an incoming pots DP with service aa as I had indicated before.

sfurqanli Wed, 01/21/2009 - 22:04

Same the 20 seconds delay on welcome message even i configurd pots DP with service aa. Below is my DP for pots.

dial-peer voice 2 pots

trunkgroup ANALOG_PHONE

service aa

destination-pattern 1..

incoming called-number 8888

forward-digits all

Any help.

thanks

sfurqanli Thu, 01/22/2009 - 04:49

I am testing bacd on DP for FXO, but it will actually be running on E1.

What do you mean by un-necessary pots DP. Kindly explain the effect of these DP in this case.

Thanks.

Paolo Bevilacqua Thu, 01/22/2009 - 05:39

You should not have voip DP to reach B-ACD via pots interface.

Please post complete configuration, enable "debug vpm signal", and take the trace again.

sfurqanli Sun, 01/25/2009 - 22:54

It has been resolved.

Actually the problem was with param welcome prompt. As you see above i put en laguage-code in the welcome prompt where as i have already configured it in another param. When i removed the en, it is working properly.

Anyway thanks for all the support provided in this regards.

Thanks.

Actions

This Discussion