Configuring WDS to write to Syslog Server

Answered Question
Jan 19th, 2009
User Badges:

Does anyone know of a way to get a WDS access point to send messaged to a Syslog Server?

Correct Answer by sschmidt about 8 years 4 months ago


logging host


Logs messages to a UNIX syslog server host.


For host, specify the name or IP address of the host to be used as the syslog server.


To build a list of syslog servers that receive logging messages, enter this command more than once.


Take a look at this document:


http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_xml_syslog_mess.html#wp1040697


It covers configuration of syslog in IOS with xml.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
sschmidt Mon, 01/19/2009 - 10:05
User Badges:
  • Cisco Employee,


logging host


Logs messages to a UNIX syslog server host.


For host, specify the name or IP address of the host to be used as the syslog server.


To build a list of syslog servers that receive logging messages, enter this command more than once.


Take a look at this document:


http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_xml_syslog_mess.html#wp1040697


It covers configuration of syslog in IOS with xml.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode