KeepAlive on Serial Interface

Rupesh Kashyap · ‎01-19-2009

Hi, I want to change Keepalive timer on the interface like, If s0/0 is down, then it should send the down message only after 5 second. Please help.

Danilo Dy · ‎01-19-2009

1. To set it to default 10 seconds

keepalive

2. To set it to 5 seconds

keepalive 5

3. To disable keepalive

no keepalive

keepalive disable

Giuseppe Larosa · ‎01-20-2009

Hello Rupesh,

the interface will be declared down after missing three consecutive keealives so with default settings it is after 30 seconds

use

keepalive 2

to see if after 6 seconds

Hope to help

Giuseppe

Richard Burts · ‎01-20-2009

Rupesh

Also be sure that the setting of keepalives is the same on both ends of the serial connection. If you set one end to keepalive 2 and leave the other end at the default of 10 you will find that the router with the short keepalives will flap which is caused by the mismatch in the keepalive timer.

HTH

Rick

HTH

Rick