01-20-2009 06:43 AM - edited 02-21-2020 03:13 AM
I went to do an er start and deleted the image and now can only go into romon> .
I did not have a back up image so i downloaded the asa802-k8.bin file but now i do not know how to get the image back on the device. can anyone help?
01-21-2009 02:05 AM
You need to tftp an image to the ASA in rommon mode, it will then boot that image. You then need to tftp an image into the flash - then it will load normally.
HTH>
03-10-2009 08:26 PM
Andrew--
I have the same problem, but can't fund documentation of TFTP from ROMMON mode for the ASA 5505. I believe I have everything set up correctly, the E)/1 shows up, but no contact to the TFTP server and I cannot ping .1 from .2-- any ideas what to do next?
03-11-2009 04:22 AM
The below link will tell you all you need to know:-
http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/trouble.html
HTH>
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide