Netflow on Hybrid 6509 switch

dagin · ‎01-20-2009

The 6509 switch is running

CatOs is version 8-4-1

The MFSC2/PFC2 is running 12.2( 18)SXF4 just like the document.

I have followed Cisco doc id:790974

There are some command used on the MFSC side which are not available in the Hybrid set up of this version

Doesn't anyone have both the complete CatoS and MFSC IOS commands to get full netflow. I see broadcast to gateway from the client Ip addresses in the netflow.

everything works to the Q-radar netflow host from our 6509 with the SUP 720/MFSC3/PFC3B running IOS code.

Giuseppe Larosa · ‎01-20-2009

Hello,

try to use the following link

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/configuration/guide/nde.html

I used netflow with catos 7.6 and IOS 12.1.19E on sup2/MSFC2 some years ago.

Hope to help

Giuseppe