01-21-2009 01:26 AM - edited 07-03-2021 05:01 PM
I have created a wlan for guests and would like to only authenticate guestusers against Local Net Users database on the WLC.
My problem is that it is also possible to log on with usercredentials for radiusauthentication.
I have not enabled any AAAservers for the guestwlan.
Any tips how to stop the radiusauthentication for this wlan ?
JF
Solved! Go to Solution.
01-21-2009 07:47 AM
You can also, uncheck the Network User box under the Radius Configuration. This check box allows the WLC to use the AAA server globally for any WLAN. Just need to make sure that under your secure WLAN, you list the AAA server explicitly, which is a best practice.
HTH,
Steve
01-21-2009 06:07 AM
That is how it currently works, but here are two options:
You can either change the Web Radius Authentication to CHAP or MD5-CHAP which is located in the GUI... Controller | General
Or else you can create 3 fake radius servers on the wlc and then specify those three under the guest wlan radius servers.
01-21-2009 07:47 AM
You can also, uncheck the Network User box under the Radius Configuration. This check box allows the WLC to use the AAA server globally for any WLAN. Just need to make sure that under your secure WLAN, you list the AAA server explicitly, which is a best practice.
HTH,
Steve
01-22-2009 12:43 AM
OK, thanks. This worked fine.
JF
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: