01-21-2009 04:10 AM - edited 03-15-2019 03:39 PM
Hi
Somebody configured ISDN from PRI to BRI? Is there any difficult?
Thanks
Peterson
01-21-2009 05:53 AM
Hi Peterson,
This is the same configuration as you would do PRI-H323, BRI-H323, but just no H323. Some pots dial peers, the ISDN commands, and voice port configuration as normal.
hth,
nick
01-21-2009 06:21 AM
Thanks nick!
01-21-2009 09:45 AM
Ola' Peterson,
check this document:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00804794c6.shtml
Hope this helps, please rate post if it does!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide