CUCM upgrade Checksum

Answered Question
Jan 21st, 2009
User Badges:

I am trying to upgrade from 6.1.2 to 6.1.3.


After the file is installed, I get the warning to check the integrity of the file against the cisco web site. For some reason, I am unable to access the release notes for 6.1.3. Is there anywhere else to find this hash value?

Correct Answer by Rob Huffman about 8 years 2 months ago

Hi Robert,


Here you go :)


Use an md5sum utility to verify that the MD5 sum of the final file is correct.


417c262e5706103c4e75a825e1d5d902 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso


http://www.cisco.com/web/software/282074295/24094/ciscocm-6-1-3.Readme.pdf


Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Wed, 01/21/2009 - 07:17
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Robert,


Here you go :)


Use an md5sum utility to verify that the MD5 sum of the final file is correct.


417c262e5706103c4e75a825e1d5d902 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso


http://www.cisco.com/web/software/282074295/24094/ciscocm-6-1-3.Readme.pdf


Hope this helps!

Rob

Rob Huffman Wed, 01/21/2009 - 07:28
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Robert,


You are most welcome! Best of luck with your upgrade.


Cheers!

Rob

Actions

This Discussion