01-21-2009 07:11 AM - edited 03-15-2019 03:40 PM
I am trying to upgrade from 6.1.2 to 6.1.3.
After the file is installed, I get the warning to check the integrity of the file against the cisco web site. For some reason, I am unable to access the release notes for 6.1.3. Is there anywhere else to find this hash value?
Solved! Go to Solution.
01-21-2009 07:17 AM
Hi Robert,
Here you go :)
Use an md5sum utility to verify that the MD5 sum of the final file is correct.
417c262e5706103c4e75a825e1d5d902 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso
http://www.cisco.com/web/software/282074295/24094/ciscocm-6-1-3.Readme.pdf
Hope this helps!
Rob
01-21-2009 07:17 AM
Hi Robert,
Here you go :)
Use an md5sum utility to verify that the MD5 sum of the final file is correct.
417c262e5706103c4e75a825e1d5d902 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso
http://www.cisco.com/web/software/282074295/24094/ciscocm-6-1-3.Readme.pdf
Hope this helps!
Rob
01-21-2009 07:22 AM
Thanks Rob for the quick and accurate response.
01-21-2009 07:28 AM
Hi Robert,
You are most welcome! Best of luck with your upgrade.
Cheers!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: