01-21-2009 07:11 AM - edited 03-15-2019 03:40 PM
I am trying to upgrade from 6.1.2 to 6.1.3.
After the file is installed, I get the warning to check the integrity of the file against the cisco web site. For some reason, I am unable to access the release notes for 6.1.3. Is there anywhere else to find this hash value?
Solved! Go to Solution.
01-21-2009 07:17 AM
Hi Robert,
Here you go :)
Use an md5sum utility to verify that the MD5 sum of the final file is correct.
417c262e5706103c4e75a825e1d5d902 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso
http://www.cisco.com/web/software/282074295/24094/ciscocm-6-1-3.Readme.pdf
Hope this helps!
Rob
01-21-2009 07:17 AM
Hi Robert,
Here you go :)
Use an md5sum utility to verify that the MD5 sum of the final file is correct.
417c262e5706103c4e75a825e1d5d902 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso
http://www.cisco.com/web/software/282074295/24094/ciscocm-6-1-3.Readme.pdf
Hope this helps!
Rob
01-21-2009 07:22 AM
Thanks Rob for the quick and accurate response.
01-21-2009 07:28 AM
Hi Robert,
You are most welcome! Best of luck with your upgrade.
Cheers!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide