IDB error in Router 1841

Unanswered Question
Jan 23rd, 2009

Why this error is coming continuosly? And its showing particular interface.

Example:-

Jan 23 11:48:41.013: [IDB Se0/1/0 DDRUnn] CSTATE_REQ: starting ctimer (2000)

Jan 23 11:48:41.013: [IDB Se0/1/0 DDRUnn] CSTATE_REQ: state assign

Jan 23 11:48:41.013: [IDB Se0/1/0 DDRUnn] LSTATE_REQ: Entry

Jan 23 11:48:41.013: [IDB Se0/1/0 DDRUnn] LSTATE_REQ: Exit

Jan 23 11:48:41.013: [IDB Se0/1/0 DDRUnn] CSTATE_REQ: Exit

Jan 23 11:48:41.013: [IDB Se0/1/0 DDRUnn] CSTATE_REQ: Entry, requested state: D

Jan 23 11:48:41.013: [IDB Se0/1/0 DDRUnn] CSTATE_REQ: state assign

Jan 23 11:48:41.013: [IDB Se0/1/0 DDRUnn] LSTATE_REQ: Entry

Jan 23 11:48:41.013: [IDB Se0/1/0 DDRUnn] LSTATE_REQ: Exit

Jan 23 11:48:41.013: [IDB Se0/1/0 DDRUnn] CSTATE_REQ: Exit

Jan 23 11:48:43.013: [IDB Se0/1/0 DDRUnn] CSTATE_TMR: Entry

Jan 23 11:48:43.013: [IDB Se0/1/0 DDRUnn] CSTATE_TMR: netidb=Se0/1/0, linestate:

n

Jan 23 11:48:43.013: [IDB Se0/1/0 DDRUnn] CSTATE_TMR: starting lineproto timer

Jan 23 11:48:43.013: [IDB Se0/1/0 DDRUnn] CSTATE_TMR: Exit

Jan 23 11:48:44.013: [IDB Se0/1/0 DDRUnn] LSTATE_TMR: Entry

Jan 23 11:48:44.013: [IDB Se0/1/0 DDRUnn] LSTATE_TMR: not spoofing, current stat

e: n

Jan 23 11:48:44.013: [IDB Se0/1/0 DDRUnn] LSTATE_TMR: informing line state trans

itions

Jan 23 11:48:44.013: [IDB Se0/1/0 DDRUnn] TRANS_ADJ: Entry

Jan 23 11:48:44.013: [IDB Se0/1/0 DDRUnn] TRANS_ADJ: Exit

Jan 23 11:48:44.013: [IDB Se0/1/0 DDRUnn] ROUTE_ADJ: Entry

Jan 23 11:48:44.013: [IDB Se0/1/0 DDRUnn] ROUTE_ADJ: Exit

Jan 23 11:48:44.013: [IDB Se0/1/0 DDRUnn] LSTATE_TMR: Exit

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Laurent Aubert Fri, 01/23/2009 - 07:13

Hi,

Those messages are coming from a debug. Use the show debug command to see which debug has been turned on.

Thanks

Laurent.

Actions

This Discussion