pgcristovam Sun, 01/25/2009 - 12:08
User Badges:

dial-peer voice x pots

destination-pattern 00T

port 0/0/0:0

prefix 0021

So when you dial 003456789 the voice gateway will send 00213456789.

Chris Deren Sun, 01/25/2009 - 13:12
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

The above example will only work for calls destined to POTS dial peers. For calls destined to IP desitnations translation rule is your best option.


sunnyverghese Mon, 01/26/2009 - 12:45
User Badges:

Hi Rob

i am fine how about you thank you for your reply actually i need to create a prefix 600

From Router A if a user dial 600 and 3 Digit extension number the 600 number needs to discard at router A and sent the calls to router B

Example: 600601 dial from A

the extension 600 need to discard and sent the 601 to router B. Is it possible through prefix dialing.

pgcristovam Mon, 01/26/2009 - 12:56
User Badges:

translation-rule 600

rule 1 /^600/ /601/

translation-profile CHANGE_NETPRO

translate called 600

dial-peer voice x voip

destination-pattern 600...

translation-profile outgoing CHANGE_NETPRO

session target ipv4:X.X.X.





This Discussion