01-25-2009 02:29 PM - edited 03-15-2019 03:45 PM
I was wondering what version of CUCM supports the VG202 and VG204, I don't see it in the 6.1(x) version, do I need to add a device pack for this to work?
Solved! Go to Solution.
01-25-2009 02:39 PM
Hi Tony,
Sadly these new Gateways are only supported in CUCM 7.x;
**â¢Cisco VG202 and VG204 Gateway Support in Cisco Unified Communications Manager Administration
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/7_0_1/cucm-rel_notes-701.html
Hope this helps!
Rob
01-25-2009 02:39 PM
Hi Tony,
Sadly these new Gateways are only supported in CUCM 7.x;
**â¢Cisco VG202 and VG204 Gateway Support in Cisco Unified Communications Manager Administration
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/7_0_1/cucm-rel_notes-701.html
Hope this helps!
Rob
01-25-2009 11:55 PM
Hi Tony,
Slight correction on the reply from Rob, the VG202 and VG204 are in fact in CUCM 6.1(3).
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_3/cucm-rel_note-613.html#wp473249
We have had them running on our 6.1(3) systems since December, with the T.38 support making it oh so much better than an ATA!
Best regards,
Mackers
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide