How to map RMAC to Real MAC Address in end station

Unanswered Question
Jan 25th, 2009
User Badges:

How to map RMAC to Real MAC Address in end station

CIP-Slot1#llc badns

pcep=0085 rmac=0068.e83a.219f lmac=4000.7206.1111 rsap=04 lsap=04 this=81F609D8

rif=0810.1F91.BB81.3E80.0000.0000.0000.0000.0000 ack-len=0000

This Command running on cisco 7200

End station is IBM mainframe

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Giuseppe Larosa Sun, 01/25/2009 - 23:54
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Worapun,

when going through a SR/TLB (Source Route Translational) Bridge between an ethernet segment and a token ring segment the order of bits inside each octet is reversed.

If this is the case the OUI

0068e8 that doesn't have a match in OUI page has to be read

00 = 00

68 = 01101000 rollover = 16

e8 = 11101000 rollover = 17

or it can be the result of an administrative settings


you can find information about conversion between llc2 TR and ethernet frames.

Hope to help



This Discussion