01-25-2009 11:43 PM - edited 03-15-2019 03:45 PM
Dear All !
I am newbie in voice systems, so forgive me for a pissible silly question.
I want connect a 1861 router and an external PBX system (BOSCH I3E, quite old model) together. I suppose it should be done using BRI interfaces, but I can't find any configuration example for it.
Can someone please post a configuration example article url ?
Many thanks,
Laszlo
Solved! Go to Solution.
01-26-2009 04:22 AM
Here for example:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a008010ef6c.shtml
Hope this helps, please rate post if it does!
01-26-2009 04:22 AM
Here for example:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a008010ef6c.shtml
Hope this helps, please rate post if it does!
01-26-2009 04:25 AM
Great, this is what I've been looking for.
Many thanks, reagrds,
Laszlo
01-26-2009 04:31 AM
Also remember to put interfaces in trunk-group to minimize DPs.
Thanks for the nice rating and good luck!
01-26-2009 04:39 AM
Khmm, as I told I am not a voice expert, and as such I only have a dim idea of you think :-)
I gesss DP stands for dial-plan but, I do not know what a trunk-group is. And how are DP's are affected by tunrk groups ? Could you post me another url where I can learn about it ?
Tnaks,
Laszlo
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: