Solved: ASA 5510 failed

rmv72 · ‎01-26-2009

ASA 5510,

#show cpu usage - near 40%, all VPN tunnels failed.

Did everything due recomendation here-

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008009491c.shtml#CPU

In the logs found error-

VPN-GATE-ORANGE %ASA-4-402123: CRYPTO: The ASA hardware accelerator encountered an error (Invalid IP Version, code= 0x17) while executing the command Process IP Sec Inbound Packet (0x30).

Is it hardware error or not?

JORGE RODRIGUEZ · ‎01-26-2009

It is hard to tell, it could be software casuing hardware issues, or hardware itself best is open up a TAC Case to be safe, if this is a common occurance definately open up a case.

see messege number 402123

http://www.cisco.com/en/US/docs/security/asa/asa80/system/message/logmsgs.html#wp4772743

Jorge Rodriguez

View solution in original post

JORGE RODRIGUEZ · ‎01-26-2009

It is hard to tell, it could be software casuing hardware issues, or hardware itself best is open up a TAC Case to be safe, if this is a common occurance definately open up a case.

see messege number 402123

http://www.cisco.com/en/US/docs/security/asa/asa80/system/message/logmsgs.html#wp4772743

Jorge Rodriguez