cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
403
Views
0
Helpful
1
Replies

SSH / Telnet Issues

kradjesh13
Level 1
Level 1

Hi,

I am having this issue when ever I apply the encryption command on the WAN interface and I can SSH into the box when I remove the crypto map command.

I am getting the following message if I try to access the remote router from our management box.

000057: .Jan 27 01:31:49.998 UTC: %CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd packet not an IPSEC packet.

(ip) vrf/dest_addr= /192.168.219.45, src_addr= 192.168.128.48, prot= 6

To remove the managemet box from the ipsec's interesting traffic I have removed its ip address and still having the same issues.

ip access-list extended ipsec

deny tcp host 192.168.128.48 host 192.168.219.45 eq 22

deny tcp host 192.168.219.45 host 192.168.128.48 eq 22

deny ip host 192.168.128.48 host 192.168.219.45

permit ip 192.168.219.40 0.0.0.7 any

permit ip any 192.168.219.40 0.0.0.7

!

Can some one please assist me in this regard.

Thanks

1 Reply 1

kradjesh13
Level 1
Level 1

I have created a Visio diagram which might be helpful for your understanding.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card