How to Setup Cisco 1841 as VPN Server for site to site VPN with watch gaurd

Answered Question
Jan 26th, 2009
User Badges:

I want to set up a cisco 1841 as VPN server to establish IP sec VPN ( site to site) from a watch gaurd firewall,

I have looked through some config examples from cisco, but can not seem to get much.

Can you please send me sample config steps i need o perform on the cisco router ? and what credentials need to be given out to watch gaurd to establish a permanent VPN ?


urgent assistance will be greatly appriciated.


Correct Answer by Ivan Martinon about 8 years 5 months ago

The cisco router will be configured as a normal IPSEC lan to lan tunnel, there is no difference when configuring it to create a tunnel to a watchguard/sonicwall or whatever peer it will use, you can use this link as guide:


http://www.cisco.com/en/US/products/hw/routers/ps221/products_configuration_example09186a008073e078.shtml


If you have any trouble let me know.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Ivan Martinon Tue, 01/27/2009 - 08:51
User Badges:
  • Cisco Employee,

The cisco router will be configured as a normal IPSEC lan to lan tunnel, there is no difference when configuring it to create a tunnel to a watchguard/sonicwall or whatever peer it will use, you can use this link as guide:


http://www.cisco.com/en/US/products/hw/routers/ps221/products_configuration_example09186a008073e078.shtml


If you have any trouble let me know.

Actions

This Discussion