cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
529
Views
0
Helpful
2
Replies

How to Setup Cisco 1841 as VPN Server for site to site VPN with watch gaurd

tariqmansoor
Level 1
Level 1

I want to set up a cisco 1841 as VPN server to establish IP sec VPN ( site to site) from a watch gaurd firewall,

I have looked through some config examples from cisco, but can not seem to get much.

Can you please send me sample config steps i need o perform on the cisco router ? and what credentials need to be given out to watch gaurd to establish a permanent VPN ?

urgent assistance will be greatly appriciated.

1 Accepted Solution

Accepted Solutions

Ivan Martinon
Level 7
Level 7

The cisco router will be configured as a normal IPSEC lan to lan tunnel, there is no difference when configuring it to create a tunnel to a watchguard/sonicwall or whatever peer it will use, you can use this link as guide:

http://www.cisco.com/en/US/products/hw/routers/ps221/products_configuration_example09186a008073e078.shtml

If you have any trouble let me know.

View solution in original post

2 Replies 2

Ivan Martinon
Level 7
Level 7

The cisco router will be configured as a normal IPSEC lan to lan tunnel, there is no difference when configuring it to create a tunnel to a watchguard/sonicwall or whatever peer it will use, you can use this link as guide:

http://www.cisco.com/en/US/products/hw/routers/ps221/products_configuration_example09186a008073e078.shtml

If you have any trouble let me know.

Many Thanks,

I should be fine now.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: