Solved: How to Setup Cisco 1841 as VPN Server for site to site VPN with watch gaurd

tariqmansoor · ‎01-26-2009

I want to set up a cisco 1841 as VPN server to establish IP sec VPN ( site to site) from a watch gaurd firewall,

I have looked through some config examples from cisco, but can not seem to get much.

Can you please send me sample config steps i need o perform on the cisco router ? and what credentials need to be given out to watch gaurd to establish a permanent VPN ?

urgent assistance will be greatly appriciated.

Ivan Martinon · ‎01-27-2009

The cisco router will be configured as a normal IPSEC lan to lan tunnel, there is no difference when configuring it to create a tunnel to a watchguard/sonicwall or whatever peer it will use, you can use this link as guide:

http://www.cisco.com/en/US/products/hw/routers/ps221/products_configuration_example09186a008073e078.shtml

If you have any trouble let me know.

View solution in original post

Ivan Martinon · ‎01-27-2009

The cisco router will be configured as a normal IPSEC lan to lan tunnel, there is no difference when configuring it to create a tunnel to a watchguard/sonicwall or whatever peer it will use, you can use this link as guide:

http://www.cisco.com/en/US/products/hw/routers/ps221/products_configuration_example09186a008073e078.shtml

If you have any trouble let me know.

tariqmansoor · ‎01-27-2009

Many Thanks,

I should be fine now.