Ping Problem

Unanswered Question
Jan 27th, 2009
User Badges:

Hi, I have a network of 3 switches given in the diagram. I can ping any Ip from 2960_1 but I cannot ping even gateway from 2960_2. Can you tell me the problem. But can pingable any IPS from the Laptop connected that switch

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Mohamed Sobair Wed, 01/28/2009 - 00:46
User Badges:
  • Gold, 750 points or more

The Link between C2960-1 and C2960-2 should be a Trunk link.



goutam_04 Wed, 01/28/2009 - 01:15
User Badges:

yes I have reconfigured as a trunk but still I cannot ping any ips from the switch. but I can ping from that Laptop.

vaisharm Wed, 01/28/2009 - 04:47
User Badges:
  • Cisco Employee,


Do you have any IP address assigned on 2960_2. If yes, then what and on which interface / SVI?



goutam_04 Wed, 01/28/2009 - 20:38
User Badges:

No, only one loopback Interface configured. But in 2960_1 there is no IP configured except one Management Vlan with Management IP. That mean do I need to configure the Vlan 800 with IP address in 2960_2 Switch?

Leo Laohoo Wed, 01/28/2009 - 21:10
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless


glen.grant Wed, 01/28/2009 - 05:27
User Badges:
  • Purple, 4500 points or more

How are you going to ping anything if switch 2 doesn't have an ip address on it ?

Sherwin Clarke Thu, 01/29/2009 - 02:38
User Badges:

Just as a tip, you can create the diagram in Visio then save it as a picture/jpg file.


This Discussion