Ping Problem

goutam_04 · ‎01-27-2009

Hi, I have a network of 3 switches given in the diagram. I can ping any Ip from 2960_1 but I cannot ping even gateway from 2960_2. Can you tell me the problem. But can pingable any IPS from the Laptop connected that switch

Mohamed Sobair · ‎01-28-2009

The Link between C2960-1 and C2960-2 should be a Trunk link.

HTH

Mohamed

goutam_04 · ‎01-28-2009

yes I have reconfigured as a trunk but still I cannot ping any ips from the switch. but I can ping from that Laptop.

vaisharm · ‎01-28-2009

Goutam,

Do you have any IP address assigned on 2960_2. If yes, then what and on which interface / SVI?

Regards

Vaibhav

goutam_04 · ‎01-28-2009

No, only one loopback Interface configured. But in 2960_1 there is no IP configured except one Management Vlan with Management IP. That mean do I need to configure the Vlan 800 with IP address in 2960_2 Switch?

Leo Laohoo · ‎01-28-2009

yes

glen.grant · ‎01-28-2009

How are you going to ping anything if switch 2 doesn't have an ip address on it ?

Sherwin Clarke · ‎01-29-2009

Just as a tip, you can create the diagram in Visio then save it as a picture/jpg file.