cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
397
Views
0
Helpful
2
Replies

Solution server installation - Views are missing

Sven Hruza
Level 4
Level 4

Hello,

our LMS is a solution installation with three Win2k3 servers.

1. Master -> CS, CM

2. Slave -> RME

3. Slave -> IPM, DFM

I registered all the three applications from the slaves on the master.

They are available in the "Functional"-view.

But the seperate views for RME, IPM and DFM are missing on the top of the LMS portal!

On another LMS installation with only one server all views are present by default...

Must I create the views by hand over the "Manage Views" -> "Add View" -> "Add Portlet" -> "Others" -> "Remote Portlet" ?

Thanks a lot!

1 Accepted Solution

Accepted Solutions

Joe Clarke
Cisco Employee
Cisco Employee

Yes. While you can register remote applications, you cannot automatically register their views. Not all portlets are "remotable".

View solution in original post

2 Replies 2

Joe Clarke
Cisco Employee
Cisco Employee

Yes. While you can register remote applications, you cannot automatically register their views. Not all portlets are "remotable".

Oh....that's a pity!

But okay, now I know that and can configure it by hand as it is shown on the original views.

Thanks a lot!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: