ASA OSPF redistribute static AND default-info orig

Unanswered Question
Jan 28th, 2009

Hello all,

I have an ASA 7.2(2) that is currently generating a default route into my NSSA area for which it is the Internet edge. I want it to redistribute some statics too, but I'm worried about redistributing the 0.0.0.0 along with the "default" route. Am I over thinking this? The current config looks like:

int outside a.b.c.d

int inside 172.16.1.1

int dmz 192.168.1.1

router ospf 1

network 172.16.1.1 255.255.255.255 area 1

network 192.168.1.1 255.255.255.255 area 1

area 1 nssa default-info-orig

default-info orig always.

route DMZ 10.1.1.0 255.255.255.0 192.168.1.200

route outside 0.0.0.0 0.0.0.0 a.b.c.e

(Side question, why do I need both def-inf commands?)

I'd like to redistribute the static 10.1.1.0/24 available via the DMZ interface so I was thinking of adding

redis stat metric-ty 1 subnets

Will the ASA generate a "default route" as well as a static 0.0.0.0 into the area? Should I use a route-map to filter out the 0.0.0.0 on the redist static command or is this not helpful?

Any guidance you can offer is greatly appreciated.

Thanks,

Matt

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion