Change http password

Answered Question
Jan 28th, 2009
User Badges:

I have the telnet and enable password for my C2950 switch, but I can't access it through http with the admin username. How can I change the http password used for that protocol by logging on the switch through telnet ?

Correct Answer by Roberto Salazar about 8 years 5 months ago

http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_22_ea9/release/notes/OL11484.html


The HTTP server interface must be enabled to display the device manager. By default, the HTTP server is enabled on the switch. Use the show running-config privileged EXEC command to see if the HTTP server is enabled or disabled.


Configure the HTTP server interface for the type of authentication that you want to use.


•enable-Enable password, the default method of HTTP server user authentication.


•local-Local user database, as defined on the Cisco router or access server.


•tacacs-TACACS server.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Roberto Salazar Wed, 01/28/2009 - 11:22
User Badges:
  • Gold, 750 points or more

http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_22_ea9/release/notes/OL11484.html


The HTTP server interface must be enabled to display the device manager. By default, the HTTP server is enabled on the switch. Use the show running-config privileged EXEC command to see if the HTTP server is enabled or disabled.


Configure the HTTP server interface for the type of authentication that you want to use.


•enable-Enable password, the default method of HTTP server user authentication.


•local-Local user database, as defined on the Cisco router or access server.


•tacacs-TACACS server.

Actions

This Discussion