cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
422
Views
0
Helpful
3
Replies

TFTP & Sample configuration

Amin Shaikh
Level 1
Level 1

Hello,

I need advice and steps on how to configure a TFTP Server and load the configuration and IOS from it for all Routers on the Network.

Which TFTP server would you advice.

Is there any cisco document with step-by-step configuration.

1 Accepted Solution

Accepted Solutions

That's why i SAID "I recommend using an external tftp server such as tftpd32".

View solution in original post

3 Replies 3

Roberto Salazar
Level 8
Level 8

I recommend using an external tftp server such as tftpd32. You may configure a router to be a tftp server, here is the procedure:

http://www.cisco.com/en/US/docs/ios/12_2/configfun/configuration/guide/fcf011_ps1835_TSD_Products_Configuration_Guide_Chapter.html#wp1000912

Thanks..

I have 25 routers on the network and feel wont be a good idea to configure a dedicated router to send Router-config to all 25 routers...

I am looking for a practical working scenario for this request.....

That's why i SAID "I recommend using an external tftp server such as tftpd32".

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco