cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
334
Views
0
Helpful
2
Replies

CCUM Seat Licenses

wrickk_2
Level 1
Level 1

From the License Unit Report and License Calculator I can view the number of seat licenses, but it doesn't display the number of seat licenses. Is there anywhere to view this information in CCUM?

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi Rick,

As far as I know the Seat License is just a "paper" license and is not actually loaded anywhere on the box. It is not even shown in the License file;

Here is an example of the License File for CCM 5.x (but 6.x has a similar look and feel)

License File Contents

The license file contains the following information:

•Number of Cisco CallManager nodes that are licensed: This indicates number of Cisco CallManager servers in a cluster that are licensed to the customer.

•Versions of the Cisco CallManager that are supported.

•Number of phone units licensed: Instead of creating a separate license for each phone type, a concept of unit license is used. Each phone type corresponds to a fixed number of license units.

Here is an Example of Permanent CCM_Node licenses

# Optional usage agreement, legal language, tracking information

# Some other comments

INCREMENT CCM_NODE cisco 5.0 permanent uncounted \

VENDOR_STRING=3000BCD4EE59D1.0

ileVersion> \

HOSTID=000bcd4ee59d \

NOTICE="200508261405391621 \

" SIGN="19B3 4C6C 25AC 6D22 4D75 DE6A 656B 08C5 \

30E4 16DB 771B 1393 9DC1 DBC4 C5AA 15CC 6E6C B7B8 895A DCBA \

B40F C551 2625 1C97 F20D 9977 6CFF 3603 081E 6FF2"

The preceding license file includes the following information:

•No expiration date for this license exists as indicated by the keyword permanent.

•This license file provides three licenses for the version 5.0 of the feature CCM_NODES.

•The Cisco specific fieldLicFileID, identifies this license file.

•You can add multiple increment lines for same feature in a license file to increase the license count. None of the INCREMENT lines should be identical and each of them should be signed independently.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_1/ccmcfg/b02licfu.html

You would need to look at your PO# for Part numbers like these;

LIC-CM6.0-7845=License CM 6.0 7845 Appliance, 5,000 seat

LIC-CM6.X-2500= License Unified CM Additional 2500 Users

From this good doc;

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps556/product_data_sheet0900aecd805e323f.html

Hope this helps!

Rob

View solution in original post

2 Replies 2

Rob Huffman
Hall of Fame
Hall of Fame

Hi Rick,

As far as I know the Seat License is just a "paper" license and is not actually loaded anywhere on the box. It is not even shown in the License file;

Here is an example of the License File for CCM 5.x (but 6.x has a similar look and feel)

License File Contents

The license file contains the following information:

•Number of Cisco CallManager nodes that are licensed: This indicates number of Cisco CallManager servers in a cluster that are licensed to the customer.

•Versions of the Cisco CallManager that are supported.

•Number of phone units licensed: Instead of creating a separate license for each phone type, a concept of unit license is used. Each phone type corresponds to a fixed number of license units.

Here is an Example of Permanent CCM_Node licenses

# Optional usage agreement, legal language, tracking information

# Some other comments

INCREMENT CCM_NODE cisco 5.0 permanent uncounted \

VENDOR_STRING=3000BCD4EE59D1.0

ileVersion> \

HOSTID=000bcd4ee59d \

NOTICE="200508261405391621 \

" SIGN="19B3 4C6C 25AC 6D22 4D75 DE6A 656B 08C5 \

30E4 16DB 771B 1393 9DC1 DBC4 C5AA 15CC 6E6C B7B8 895A DCBA \

B40F C551 2625 1C97 F20D 9977 6CFF 3603 081E 6FF2"

The preceding license file includes the following information:

•No expiration date for this license exists as indicated by the keyword permanent.

•This license file provides three licenses for the version 5.0 of the feature CCM_NODES.

•The Cisco specific fieldLicFileID, identifies this license file.

•You can add multiple increment lines for same feature in a license file to increase the license count. None of the INCREMENT lines should be identical and each of them should be signed independently.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_1/ccmcfg/b02licfu.html

You would need to look at your PO# for Part numbers like these;

LIC-CM6.0-7845=License CM 6.0 7845 Appliance, 5,000 seat

LIC-CM6.X-2500= License Unified CM Additional 2500 Users

From this good doc;

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps556/product_data_sheet0900aecd805e323f.html

Hope this helps!

Rob

Thanks Rob