NAT inside with diferent IP that overload

Unanswered Question
Jan 29th, 2009

Hi all,

I have a mail server that I need it to have access from the outside (that is done), but I also need it to get out with that same address (different from the interface overload address) and here is the problem. I have to use the static with a route map so I can access the mail server from my other location using the VPN (other wise it will be nated and unreachable).

I have this:

ip nat inside source static 192.168.60.250 210.xxx.xxx.xxx route-map NAT_179

!

ip access-list extended NAT_179

deny ip 192.168.60.0 0.0.0.255 192.168.60.0 0.0.0.255

deny ip 192.168.60.0 0.0.0.255 192.168.1.0 0.0.0.255

deny ip 192.168.60.0 0.0.0.255 192.168.2.0 0.0.0.255

deny ip 192.168.60.0 0.0.0.255 192.168.20.0 0.0.0.255

deny ip 192.168.60.0 0.0.0.255 192.168.30.0 0.0.0.255

deny ip 192.168.1.0 0.0.0.255 192.168.60.0 0.0.0.255

deny ip 192.168.2.0 0.0.0.255 192.168.60.0 0.0.0.255

deny ip 192.168.20.0 0.0.0.255 192.168.60.0 0.0.0.255

deny ip 192.168.30.0 0.0.0.255 192.168.60.0 0.0.0.255

deny ip 192.168.10.0 0.0.0.255 192.168.60.0 0.0.0.255

deny ip 192.168.60.0 0.0.0.255 192.168.10.0 0.0.0.255

permit ip any any

Any idea on how I can do this?

Regards

Edit: problem solved, just a matter of ACL

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion