During a CatOS to IOS conversion we experienced a power failure - :(
After we recovered from the power failure, the switch boots into the SP rommon mode.
Issuing the "boot" command (rommon> boot) the switch boots to the RP mode, reads the new IOS image and all seems fine.
ROUTER# show version reveals the RP config-register is 0x2102.
ROUTER# remote command switch show bootvar reveals the switch config-register is 0x8002.
I know the SP config-register should be 0x2102.
Upon booting, the new IOS file is read but our saved config file is ALWAYS ignored.
I have tried to reset the SP config-register with no luck.
Anyone know how to change the SP config-register settings from SP rommon, RP rommon, router# or other?
Thanks for ANY help