01-29-2009 04:41 PM - edited 03-15-2019 03:52 PM
Folks,
do you have some document that will let you know how to register third party SIP phones (polycom sound ip 330) with CME version 4.2
thank you
Cris
Solved! Go to Solution.
01-29-2009 06:00 PM
Hi Cris,
It looks like this:
voice service voip
sip
registrar server
voice register global
mode cme
source-address 1.1.1.1 port 5060
max-dn X
max-pool X
voice register dn 1
number 1000
voice register pool 1
id mac XXXX.XXXX.XXXX
type
number 1 dn 1
username X password X ! Required if IP phone's address is on different subnet than SIP CME source address
This is the minimum required configuration for SIP CME.
By the way, it's not officially TAC supported, but you can usually get it to work anyway.
hth,
nick
01-29-2009 06:00 PM
Hi Cris,
It looks like this:
voice service voip
sip
registrar server
voice register global
mode cme
source-address 1.1.1.1 port 5060
max-dn X
max-pool X
voice register dn 1
number 1000
voice register pool 1
id mac XXXX.XXXX.XXXX
type
number 1 dn 1
username X password X ! Required if IP phone's address is on different subnet than SIP CME source address
This is the minimum required configuration for SIP CME.
By the way, it's not officially TAC supported, but you can usually get it to work anyway.
hth,
nick
01-29-2009 06:40 PM
thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide